7-3
GAS SAFETY ADVICE
Disconnecting
Ensure hands are away from the nozzle
barrel.
3. When dispensing has
ended, squeeze back
lever and release the
latch, then release the
lever fully. A small
release of gas will occur
as you release the
lever. This is normal! Do not place hands on
barrel until after the gas has released.
4. Turn the barrel anti-clockwise a quarter
turn to release nozzle from the vehicle.
Replace nozzle in holder on dispenser.
De Visser
TM
nozzle filling instructions
Ensure De Visser
TM
nozzles are fitted with
protective nozzle shields. Report to site staff
if missing.
Connecting
1. Hold the hose behind
the nozzle and the
guard, keeping lever
pushed forward with the
handle at the 12 o’clock
position.
Locate the nozzle over the lugs on the filler
valve and turn the lever quarter turn
clockwise to lock.
From this moment ensure hands are away
from the nozzle barrel.
2. Pull back lever
towards hose and latch
into place. Ensure lever
is latched securely.
Push button and hold
until the fill is completed
or desired amount
reached.
Disconnecting
Ensure hands are away
from the nozzle barrel.
3. Hold hose behind
guard and release lever
by pushing forward. (Do
not place hands on the
nozzle until after the
gas has been released.
A small release of gas will occur as you
release the lever. This is normal!
4. Turn lever anti-clockwise quarter turn to
release nozzle from vehicle. Replace nozzle
in holder on dispenser.
To Next Page
Loading...
