12-23
CONTROL SYSTEM
SM ALPHA 1-E.3 GB
12.10 Forced Operation
Forced operation allows units to start, stop and operate in Cooling or Heating in pre-set
temperature according to the following table:
Forced operation
mode
Pre-set Temp for :
WMZ, WMF,WNG models
Cooling 22°C
Heating 28°C
Note:
• While under the forced operation, the temperature compensation
schedule.
• The forced operation is activated when the mode button on the
Display Board is used to switch the unit to Cool or Heat mode.
• The IFAN is always set to Autofan Speed in forced operation.
To Next Page
Loading...
