To Next PageTo Next PageWhy is only the indoor fan working on my Electra Alpha 7 Air Conditioner?
If only the indoor fan is working on your Electra Air Conditioner, the run capacitor of the outdoor fan motor may be faulty, in which case you should replace the capacitor. Alternatively, the windings of the outdoor fan may be shorted, requiring you to replace the motor.
What to do if the indoor fan on my Electra Air Conditioner is not functioning correctly?
If the indoor fan of your Electra Air Conditioner is not functioning correctly, check the voltage between the indoor fan terminals on the main P.C.B. If there is voltage, replace the capacitor or motor.
How to fix Electra Alpha 7 Air Conditioner refrigeration system not working correctly?
If the refrigeration system in your Electra Air Conditioner isn't functioning correctly, check for leaks or restrictions using an ammeter, pressure gauge, or surface thermometer. Repair the refrigeration system and charge refrigerant if necessary.
Why is the Electra Alpha 7 outdoor fan not working correctly?
If the outdoor fan of your Electra Air Conditioner isn't working correctly, check the voltage between the outdoor fan terminals on the main P.C.B. If there is no voltage, replace the main P.C.B. If voltage is present, replace the capacitor or motor. Also, check and repair the electrical wiring between the indoor and outdoor units.
What to do if Electra Air Conditioner indoor fan is not working correctly?
If the indoor fan of your Electra Air Conditioner isn't functioning correctly, check the voltage between the indoor fan terminals on the main P.C.B. If there is voltage, replace the capacitor or motor.
What to do if the Electra Alpha 7 Air Conditioner compressor doesn't start?
If the compressor on your Electra Air Conditioner isn't starting, check the voltage on the compressor terminals on the outdoor unit using an ammeter. If there's no voltage, replace the main P.C.B. If the voltage is low, repair the power supply. If the voltage is correct, replace the capacitor or compressor. If there is no voltage, repair electrical wiring between indoor and outdoor units.
Why doesn't the red stand-by indicator light up on my Electra Air Conditioner?
If the stand-by indicator (red LED) on your Electra Air Conditioner's central control display panel doesn’t light up, there may not be correct voltage between the line and neutral terminals on the main P.C.B. If the voltage is low, repair the power supply. If there is no voltage, repair the general wiring. If there is correct voltage, replace the main or display P.C.B’s.
What to do if the green operation indicator does not light up when starting my Electra Air Conditioner from the unit?
Check the main P.C.B and display P.C.B, and replace P.C.B if necessary.
Why is there only a partial air supply at the indoor unit of my Electra Alpha 7 Air Conditioner?
If you're experiencing a partial or limited air supply at the indoor unit of your Electra Air Conditioner, it could be due to a lack of refrigerant, which may also cause a whistling noise and ice formation on the indoor unit coil in cooling mode. Charge the unit after localizing the leak.
Why is there no air supply at the indoor unit of my Electra Alpha 7 Air Conditioner, even though the compressor is running?
If there's no air supply at the indoor unit of your Electra Air Conditioner while the compressor is running, the indoor fan motor might be blocked or turning slowly, the indoor fan run capacitor might be faulty, or the motor windings could be shorted. Check the voltage and repair the wiring if necessary. Also, check if the fan wheel is tight enough on the motor shaft and tighten it if necessary.
General| Brand | Electra |
|---|---|
| Model | Alpha 7 |
| Category | Air Conditioner |
| Language | English |
Technical specifications for Alpha 7 indoor and CON 7 outdoor units, including electrical and performance data.
Product data for Delta 7 DF indoor and GCN 7 RC outdoor units, covering cooling and heating performance.
Detailed specifications for Alpha 9 indoor and GCN 9 outdoor units, including electrical and performance data.
Product data for Delta 9 RC/ST and GCN 9 RC models, including capacity and operating parameters.
Presents cooling capacity and power input data for various models under different entering air conditions.
Details heating capacity and power input data for models at various entering air conditions.
Details power supply, current, circuit breaker, and wiring specifications for single-phase units.
Illustrates refrigeration cycle diagrams for heat pump models in cooling and heating modes.
