Electra CLASSIC - Saving Databases and Programming List of Inhabitants through PC

Step 8
Outdoor Panel
VPM/APM
6
Security
setup
configuration
Step 9
Outdoor Panel
VPM/APM
7
Setup
of the
maximum
no. of digits
for the
addresses
Step 10
Outdoor Panel
VPM/APM
8
Informations
Through a PC connection, the following actions may take place:
1. Saving the database with the access tag codes memorised in the panel.
2. Programming the list of inhabitants in the panel.
3. Programming other parameters.
Minimum resources necessary for the communication and programming with the PC:
Ÿ IBM Pentium II computer, 400 MHz, with USB serial interface, operating system:
Windows 98, Windows XP, Windows Vista, Windows 7
Ÿ serial communication interface: INT.COM1 (supplied by the producer)
Ÿ software: InterProg, licensed by ELECTRA is available on the webpage:
http://www.electra.ro, with the user password.
Saving the databases and programming the list of inhabitants through the PC
BEEEEP
Press key 6 for security setup configuration. 1x[ ] is issued.
The following message is displayed:
1. Break-in: off/on
2. Open door: on/off
3. Aux: on/off
4. Pullup: on/off
By successively pressing keys 1, 2, 3 or 4, the functions may be
separately activated/deactivated:
- Local panel break-in warning
- Signalling at the terminals that the building entrance door
is left open
- Auxiliary command (from the main unit) of a gate or of other
applications
- “Pullup” activation – It is active by default at the panels with
address 1 and needs to be activated at the panels with a
different address (2, 3 or 4), installed in parallel at a distance
higher than 50 m.
Press key 0 and return to the menu from Step 2 .
Press key 7 for changing the setup of the maximum no. of digits
BEEEEP
for the addresses. 1x[ ] is issued. The following message
is displayed:
Setup max address
digits: _
The addresses may be 1, 2, 3 or 4. The following message
is displayed:
Maximum no. of address
digits is: _
Automatically return to the menu from Step 2 .
Long press key 8 for more information about the settings of
the panel and the software version.
39