16
SETTING UP THE WIFI APP
This is designed as a general guide to the setup. There may be differences in the interface
and features available due to product development and features of the model.
BEFORE YOU START
• Ensure your router provides a standard 2.4ghz connection.
• If your router is dual-band ensure that both networks have different network names (SSID).
The provider of your router / Internet service provider will be able to provide advice specific
to your router.
• Place the dehumidifier as close as possible to the router during setup.
• Once the app has been installed on your phone, turn off the data connection, and ensure
your phone is connected to your router via WiFi.
DOWNLOAD THE APP TO YOUR PHONE
Download the ”TUYA SMART” app, from your chosen app store, using the QR codes below,
or by searching for the app in your chosen store.
Android IOS
CONNECTION METHODS AVAILABLE FOR SETUP
The smart device has two different setup modes, CF (Quick Connection) and AP
(Access Point). The quick connection is a quick and simple way to set the unit up.
AP connection uses a direct local WiFi connection between your phone and the
dehumidifier to upload the network details.
Before starting the setup, please ensure that your dehumidifier is in the correct
standby mode for the connection type you are attempting, the display your
dehumidifier will indicate this.
CHANGING BETWEEN CONNECTION MODES / WIFI RESET
To change the unit between the two connection types, hold the WIFI button for 3
seconds. The connection mode is signified by the frequency of the flashing WIFI
light. This will also remove any previous WIFI configuration.
To Next Page
Loading...
Need help?
General
