POWER BUTTON
Turns the appliance on/off
MODE BUTTON
Select the function of the unit between SMART / HIGH / LOW / and Air
Purifier. The LED’s next to the button will show which mode is selected.
SMART MODE: The unit will default to SMART mode the first time it is
switched on and remains in this mode until another program is chosen.
In smart mode, it will aim for a relative humidity of 50-55%, and the fan
speed will be adjusted automatically.
HIGH: The unit will dehumidify and aim for the humidity set using the
up and down buttons.
LOW: The unit will dehumidify and aim for the humidity set using the
up and down buttons.
AIR Purifier: Only the fan will run and water is not extracted. The
filters will purify the air. The UV and Plasma ioniser can also be used
to further improve the air quality.
CHILD LOCK BUTTON
Hold this button for 3 seconds to activate or deactivate the child lock.
While activated, the control panel on the unit will not respond to any
presses. Please note the child lock is only available when the remote
screen is on.
OSC. (Oscillation function) BUTTON
There are three different options for the outer louvre on the unit. It
can be set at 45 or 90 degrees, or alternatively to swing. Use the
dehumidifier at a 45-degree angle or with the swing function for
Laundry mode
UV & ION BUTTON
This operates both the Ioniser and UV modes. You can use the
Ioniser and UV sterilisation individually or combine them for
increased effectiveness.
The indicators will show which function is currently running.
Repeatedly press the UV/ION button to change between the options.
To Next Page
Loading...
Need help?
General
