ElectrIQ IQOOL-SMART15HP - Operation Controls; Control Panel and Remote Overview

OPERATION
11
CONTROL PANEL
REMOTE CONTROL
The air conditioner can be controlled with the remote control. Two AAA-batteries are required.
NOTE: Further details of the functions can be found on the following page.
POWER
Press the POWER button to turn the machine on or
off.
MODE
Press the MODE button to switch between cooling,
heating, fan and dry modes.
FAN
Press the FAN button to change between high,
medium and low fan speeds
LED
Press to turn the LED display on the unit on and off.
Press the UP button to increase the desired
temperature or timer duration
Press the DOWN button to decrease the desired
temperature or timer duration
SILENT
Press to activate SILENT mode. In silent mode the
fan will run at low speed to minimise the operating
noise of the unit.
SWING
Press to turn the swing function on and off
(Can only be activated from the remote)
TIMER
Press the TIMER button to set the timer.
DIGITAL DISPLAY
COOLING
FAN
DRY
HEATING
SILENT
SPEED
INCREASE/DECREASE
TIMER
SPEED
MODE
POWER