ELECTRO BRAND 2034 - Precautions; Safety Information; Before Use

5
PRECAUTIONS
Safety Informaon
1. In order to shut off the power of this product completely, unplug the power cord from the wall
outlet or remove the connected USB cable. Be sure to unplug the unit and remove all power
supply such as USB cable or dry baeries if you do not intend to use it for an extended period of
me, such as while on vacaon.
2. Use of controls, adjustments and performance of procedures other than those specified herein
may result in hazardous radiaon exposure.
3. If this product develops trouble, conta
ct a qualified service center, and do not use the product
in defecve state.
Safety Precauons
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
RISKS OF ELECTRIC SHOCK- DO NOT OPEN!
To reduce the risk of electric shock, do not remove cover or back.
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert user to the presence of non-insulated “dangerous voltage” within
the product’s enclosure that may be of sufficient magnitude to constute risk of
electric shock to persons.
The exclamaon point within an equilateral triangle is intended to alert user to the
presence of important operang and maintenance (servicing) instrucons in the
literature accompanying the appliance.
(See markings on the back of the unit)
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
BEFORE USE
1. Remove all packaging materials from unit. Check to make sure that you have removed all
included components before discarding the box and packing.
2. Choose unit installaon locaon carefully. Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locaons subject to vibraons and excessive dust, cold or moisture. Keep away
from sources that hum, such as transformers or motors.
3. Do not open the
cabinet as this might result in damage to the circuitry or electrical shock. If a
foreign object should get into the set, contact your dealer.
4. When removing the power plug from the wall outlet, always pull directly on the plug, never
pull the cord.
5. Do not aempt to clean the unit with chemical solvents as this might damage the finish. Use a
clean, dry cloth.
6. In order to shut off the power to this product completely, unplug the power cord from the wall
outlet or remove the connected USB cable. Be sure to unplug the unit and remove
all power