Eliminator
®
Monitor
Eliminator
®
Monitor
6
SPEAKERSMonitors Part Number 5353080002
600 Cecil Street, Buchanan, MI 49107
616/695-6831, 616/695-1304 Fax
Telex Communications, Inc., 2000 Litho in U.S.A.
Directivity Index D
i
,
(D
i
= 10 log
10
R
(Q)) 800- to 16,000-Hz
Median (see Figure 7):
12.0 dB (+4.0 dB, -3.6 dB)
Distortion, 0.1 Full Power Input, (see
Figure 2)
Second Harmonic,
100 Hz:
27 dB, 4.7%
1,000 Hz:
35 dB, 1.8%
10,000 Hz:
19 dB, 11.4%
Third Harmonic,
100 Hz:
36 dB, 1.6%
1,000 Hz:
44 dB, 0.6%
10,000 Hz:
34 dB, 2.1%
Transducer Complement,
Low Frequency:
DL15BFH
High Frequency:
DH2010A driver
HP85M constant-directivity horn
Box-Tuning Frequency:
60 Hz
Crossover Frequency:
2,000 Hz
Crossover Slope:
12 dB per octave
Impedance, (see Figure 3)
Nominal:
8 ohms
Minimum:
5.1 ohms
Input Connections:
Two parallel 1/4-inch phone jacks
(Two parallel Neutrik Speakon
®
NL4MP connectors on Eliminator
Monitor (E))
Enclosure Materials and Colors:
Black carpet-covered Road-Wood
Black perforated metal grille
Dimensions (see Figure 4)
Width:
640 mm (25.39 in.)
Height:
406 mm (15.98 in.)
Depth:
471 mm (18.53 in.)
Net Weight:
19.5 kg (43 lb)
Shipping Weight:
22.7 kg (50 lb)
Figure 7Directivity vs. Frequency
(anechoic environment)
Specifications
Typical Axial Frequency Response, Swept
Sine Wave, 4 volts at 3.05 meters (10
feet), (anechoic environment, normalized
for 1 watt at 1 meter; see Figure 1):
77-20,000 Hz (half space)
Low-Frequency 3-dB-Down Point:
77 Hz (half space)
Usable Low-Frequency Limit (10-dB-
down point):
65 Hz (half space)
Efficiency:
3.3%
Long-Term Average Power-Handling
Capacity per EIA Standard RS-426-A
1980 (see Power-Handling Capacity
section):
350 watts
Maximum Woofer Acoustic Output:
8.3 watts
Sensitivity (SPL at 1 watt, 1 meter input,
anechoic environment, swept sine wave):
99 dB
Dispersion Angle Included by 6-dB-
Down Points on Polar Responses,
Indicated One-Third-Octave Bands of
Pink Noise (see Figure 6),
4,000-20,000 Hz, Horizontal:
55° (+18°, -9°)
4,000-20,000 Hz, Vertical:
80° (+21°, -21°)