Electro-Voice EVERSE 8 - Page 28

28 en | Operation EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
!
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod
stand to be certain it is capable of supporting the weight of the loudspeaker.
To mount a loudspeaker on a tripod stand:
1. Place the tripod stand on a level and stable surface.
1. Fully extend the legs on the tripod stand.
2. Do not compromise the tripod stand's structural integrity by trying to make the stand
taller.
3. Do not attempt to mount more than one loudspeaker on a stand designed for a single
loudspeaker.
1. Lift the loudspeaker using two hands.
2. Set the pole cup located on the bottom of the loudspeaker onto the pole.
Mounting a loudspeaker on a pole
To mount a loudspeaker on a pole:
1. Place the subwoofer on a level and stable surface.
2. Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.