34 en | Amplifier DSP EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
displayed.
Lock status - Indicates that the LCD display and controls are locked. Press the MASTER
VOL or channel select soft key to unlock.
11. S - Audio streaming. The available options are:
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
12. C - Control app. The available options are:
OFF - DISABLED
FLASHING - PAIRING MODE
SOLID - CONNECTED
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating input CLIP or output LIMIT on the LCD display.
CLIP
CLIP indicates that the signal to the loudspeaker is too high, resulting in a clipped signal into
the loudspeaker.
If CLIP is shown:
4 Reduce the INPUT GAIN and/or the signal on the mixer or source equipment.
LIMIT
LIMIT protects the loudspeaker from short-term peaks and long-term overload, which can
cause distortion. When LIMIT is displayed on the screen, the limiter is active.
If the LIMIT indication is shown often or continuously:
4 Reduce the output volume (MASTER VOL). This is strongly recommended.
5.3 DSP controls
An integrated DSP control menu allows the user to select multiple DSP system settings on the
loudspeaker.
To Next Page
Loading...
