Electro-Voice EVERSE 8 - Floor Monitor & Kickback

30 en | Operation EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
i
Notice!
Select LOCATION TRIPOD in menu or app for best sound.
4.5 Floor monitor & kickback
EVERSE 8 loudspeakers may be used as a floor monitor or in kickback position by placing the
loudspeaker on one of the two integral monitor angles.
Setting up a loudspeaker as a floor monitor
To set up a loudspeaker as a floor monitor:
1. Place the loudspeaker on a level and stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
3. Set the loudspeaker location to MONITOR in the DSP control menu.
100º
5
5º
100º
Figure4.1: Optimum coverage in monitor position (side view left and front view right)
Setting up a loudspeaker in kickback position
To set up a loudspeaker in kickback position:
1. Place the loudspeaker on a level and stable surface.
2. Tilt the loudspeaker rearward to rest securely in the kickback position.
3. Safely route cables to prevent injury to performers, production crew, and audience
members.