Electro-Voice EVERSE 8 - Page 48

48 en | Input & Mixer operation EVERSE 8
2022-10 | 02 | F.01U.401.530
User manual
Electro-Voice
LINK SPEAKERS
BACK
EXIT
Table6.4: INPUT 3/4 DSP control menu MIXER mode
INPUT DSP control menu for BASIC mode
INPUTS1 & 2
LEVEL 0dB (Default)
MUTE, -80dB - +42dB
EXIT
48V
(INPUT1 only)
OFF (Default)
ON
EXIT
Table6.5: INPUTS1 & 2 DSP control menu BASIC mode
INPUTS3/4
LEVEL 0dB (Default)
MUTE, -80dB -
+42dB
EXIT
BLUETOOTH BACK
BLUETOOTH ON (Default)
OFF
ID (4-digit unique device number)
CONTROLPAIR
AUDIOPAIR
LINKSPEAKERS
BACK
EXIT
Table6.6: INPUTS3/4 DSP control menu BASIC mode
Adjusting the incoming sound
Caution is advised when adjusting the incoming sound. Usually minor changes are sufficient to
produce the best results in the overall sound.
To adjust the incoming sound:
– Set all EQ controls to 0dB or FLAT.
– Avoid setting the EQ controls to extreme positions.
– Use natural reproduction as a starting point.