Electro-Voice EVID 4.2 - Maintenance; Painting the EVID Speakers

16 en | Maintenance EVID Surface-mount loudspeakers
2023-07 | 04 | F.01U.177.642
Installation manual
Bosch Security Systems, LCC
5 Maintenance
Your EVID™ system provides years of durability and reliable service. No routine maintenance is
necessary.
To clean the system:
– Wipe with a soft, damp cloth.
– Never use solvents or harsh cleaning agents of any kind.
Electro-Voice
®
products are guaranteed against malfunction due to defects in materials or
workmanship for a specified period, as noted in the individual product line statement(s), or in
the individual product datasheet or Installation manual, beginning with the date of original
purchase. If such malfunction occurs during the specified period, the product will be repaired
or replaced (at our discretion) without charge. The product will be returned to the customer
prepaid.
5.1 Painting the EVID speakers
Painting the loudspeakers
The EVID™ 4.2 and 6.2 are made of high-impact ABS, which accepts a wide variety of paints.
1. Remove the grille and mask the baffle.
2. Clean the cabinet and grille by rubbing the speaker with a lightly dampened cloth.
!
Warning!
Do not use abrasives such as sandpaper or steel wool. Never use gasoline, kerosene, acetone,
MEK, paint thinner, harsh detergents, or other chemicals, as these agents may cause
permanent damage to the enclosure.
3. Apply latex or enamel paint.
Spraying is recommended
i
Notice!
Painting the grille
Painting the grille requires spray painting. If the grille is rolled or brush painted, the mesh
may become clogged with paint and poor sound quality may result.