EasyManua.ls Logo

Electro-Voice P3000 - Frequency Response; Noise Interference; Amplitude Non-Linearity

Electro-Voice P3000
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
F. FREQUENCY RESPONSE
• -3 dB level drop, referenced to the level at the standard frequency of 1 kHz
• the power amplifier's border frequencies are at 13 Hz and 40 kHz respectively, referenced to -1 dB
Amplification frequency response
Input Output f (u) f (o) Remarks
INPUT A/B SPEAKER A/B <10 Hz 75 kHz HI-LO-CUT Off
INPUT A/B SPEAKER A/B 20 Hz 35 kHz HI-LO-CUT On
Distortion-limited transmission range (performance bandwidth)
THD = 0.1 %, 1/2 nominal power at 4 ohms, MBW = 500 kHz
Input Output f (u) f (o) Remarks
INPUT A/B SPEAKER A/B <10 Hz 48 kHz HI-LO-CUT Off
G. PHASE RESPONSE ±30° (20 Hz - 20 kHz, HI/LO-CUT off)
H. INPUT IMPEDANCE 20 k (20 Hz … 20 kHz)
I. AMPLITUDE NON-LINEARITY
Amplitude non-linearity Remarks
nominal overall distortion
<0.05 % MBW = 80 kHz, f = 1 kHz
standard overall distortion
<0.02 % MBW = 80 kHz, f = 1 kHz
IMD-SMPTE
<0.01 % 60 Hz, 7 kHz
DIM 30
<0.01 % 3.15 kHz, 15 kHz
DIM 100
<0.01 % 3.15 kHz, 15 kHz
J. CROSSTALK - at f = 1 kHz less than <-70 dB
K. DAMPING FACTOR - internal at f = 1 kHz >300
at f = 100 Hz >400
L. SLEW RATE - internal >40 V/µs
M. NOISE INTERFERENCE
- U(F) = external voltage un-weighted with B = 22 Hz … 22 kHz, effective value (IEC 268-1)
- U(G) = noise voltage, frequency-weighting filter according to CCIR-468-3, quasi peak weighted (IEC 268-1)
- U(A) = interference voltage A-weighted, dB(A), effective value (IEC 268-1)
- Signal-to-noise ratio referenced to a nominal output voltage of 69.3 V (1200W/4ohms)
- HI/LO-CUT ON, GND LIFT = GROUNDED
Interference
output voltage
S/N ratio Equivalent input
interference
voltage
Equivalent input
interference level
Residual
interference
output voltage
U(F)
< 615µV > 101 dB < 6.9µV < -101 dBu < 435µV
U(G)
< 3.65 mV > 85.5 dB < 41µV < -85.5 dBu < 1.55mV
U(A)
i.s.=0dBu
< 490µV > 103 dB < 5.5µV < -103 dBu < 345µV
U(A)
i.s.=6dBu
< 245µV > 109 dB < 5.5µV < -103 dBu < 170µV
U(A)
Gain=26dB
< 110µV > 116 dB < 5.5µV < -103 dBu < 90µV
The S/N ratio (A-weighted) at max. output voltage at 4 is >103 dB.
N. DIMENSIONS
Height : 132.5 mm (3 HU)
Width : 483 mm
Depth : 426 mm
O. WEIGHT m = 29 kg

Related product manuals