10 en | Installation ZXA1 Series Loudspeaker
2022-06 | 06 | F.01U.218.487
User manual
Electro-Voice
3.2 Suspending the loudspeakers
Electro-Voice ZXA1 loudspeakers may be safely suspended with single stud fittings by using
the MP1 suspension kit, or quickly attached to a truss by using the CA-Zx truss clamp adaptor
(both sold separately). See MP1 or CA-Zx instruction sheets for proper assembly and use.
Warning!
Suspending any object is potentially dangerous and should only be attempted by individuals
who have a thorough knowledge of the techniques and regulations of rigging objects
overhead.
Electro-Voice strongly recommends that ZXA1 speakers be suspended taking into account all
current national, federal, state, and local regulations. It is the responsibility of the installer to
ensure that ZXA1 speakers are safely installed in accordance with all such regulations. If ZXA1
speakers are suspended, Electro-Voice strongly recommends that the system be inspected at
least once a year. If any sign of weakness or damage is detected, remedial action should be
taken immediately. There are instruction sheets for each EV Suspension and Array Kit that
should also be consulted prior to suspending speakers.
Figure3.5: MP1-B mounting plate accessory
To Next Page
Loading...
