IQ 2000/5000 Installation Manual
EU Directives
HelpEU Directives
European Union - Low Voltage Directive
Declaration of Conformity by the Manufacturer
Application of Council Directive 72/23/EEC, 93/68/EEC
Manufacturer: Reliance Motion Control
Address: 6950 Washington Avenue South
Eden Prairie, Minnesota 55344, USA
A registered ISO 9001 Company
Herewith declares that all servo drives listed below
BRU-Series Advantage Lines, models:
PDM-010 P/N 9101-2141 (16MHz Clock)
PDM-020 P/N 9101-2142 (16MHz Clock)
PDM-030 P/N 9101-2143 (16MHz Clock)
PDM-010 P/N 9101-2161 (20MHz Clock)
PDM-020 P/N 9101-2162 (20MHz Clock)
PDM-030 P/N 9101-2163 (20MHz Clock)
PDM-075 P/N 9101-2164 (20MHz Clock)
When operating any of the following motor families:
S-, H-, F- and LD-Series motors
And when operated with or without the IF2 24V Sourcing Module, P/N 9103-0152.
And when operated with or without the Operator Terminal, P/N 9101-2017.
When installed in accordance with the installation instructions, contained in the “IQ-2000 Installation
Requirements for Compliance to European Directives” conforms to the following standard.
EN 60204-1
Signed: .
(John Durrant, Technical Manager)
Date: .
Electro-Craft, Ltd, Fourth Avenue, Crewe, Cheshire, CW1 1XL, UK
To Next Page
Loading...
