Electrohome EAAC200 - Operating Instructions - Power and Battery; Power Connection and Battery Backup

- 11 -
POWER CONNECTION
1. Plug the AC power cord into a household AC outlet.
2. Clock display will ash 12:00 until set to correct time.
BATTERY BACKUP
This alarm clock is equipped with an optional battery backup feature. This will
restore your alarm clock settings in the event of a power outage.
Installing the batteries (not included)
1. Open the battery compartment on the bottom of the alarm clock by
pushing on the latch and pulling the door open.
2. Install 2 x AA batteries ensuring that the battery polarity corresponds to
the polarity in the battery compartment.
3. Close the battery compartment cover.
NOTE:
• Batteries must be installed by an adult.
• Use only the recommended size and type of battery specied.
• Please be sure to follow the correct polarity when installing the battery in the battery
compartment. A reversed battery may cause damage to the alarm clock.
• DO NOT mix dierent types of batteries or mix new and used batteries.
• When not using the unit for a prolonged period of time, please remove the batteries to
avoid possible damage caused by leaking batteries.
OPERATING INSTRUCTIONS