Electrohome EAAC200 - Operating Instructions - Presets and Alarm 1; Setting Radio Presets; Setting Alarm 1

- 13 -
TO SET / RECALL THE RADIO PRESETS
You can preset and store the frequency of 20 radio stations in the memory; 10
AM stations and 10 FM stations.
1. Press the
button once to turn the radio ON.
2. Press the
button to toggle between the AM and FM
radio bands.
3. Set radio to desired station.
4. Press and hold the button and PO1 will ash on the screen.
5. Press the button to conrm setting to PO1 or wait 5 seconds for
ashing to stop.
6. Repeat the steps above to preset more radio stations.
7. To recall a preset station, press the button to toggle through the
current preset radio stations.
SETTING THE ALARM
You can preset and store two separate alarm settings. It allows you to set an
alarm for yourself and a second as a backup, or use the second independently
timed alarm for a partner.
SETTING ALARM 1
1. Please ensure the radio is OFF.
2. Press the
button once to view current alarm setting then press and
hold the button to set ALARM 1. The alarm time will ash on
the display.
3. Press the HR button to increase the HOUR.
4. Press the MIN button to increase the MINUTES.
5. Once alarm time is set, press the button once to conrm setting.
OPERATING INSTRUCTIONS