EasyManua.ls Logo

Electrohome EAAC200 - Troubleshooting, Care, and Specifications; Clock and Alarm Troubleshooting; Care and Maintenance Guidelines; Product Specifications Summary

Electrohome EAAC200
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 16 -
RADIO
Noise or sound distorted
on AM or FM.
AM-interference from trac. Tune the radio for better AM
reception.
FM-antenna wire not
extended.
Extend antenna wire.
SYMPTOM POSSBILE CAUSE POSSIBLE SOLUTION
CLOCK
Incorrect Time. Clock not set. Set the clock.
Batteries inserted incorrectly,
not connected or dead.
Check batteries.
Alarm does not turn on. Alarm is not set to turn on.
Press the button to set ALARM 1
or
to set ALARM 2
Clock is not set. Set the clock.
Alarm time is not set. Set alarm time.
Precautions
1. Always turn the unit o after use.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Use a clean soft cloth moistened with lukewarm water to clean the
cabinet. Never use chemical cleaners that could damage the nish of
the unit.
4. Disconnect the unit from any power sources before cleaning.
Power Source AC 120V~60Hz
Frequency Range FM: 87.5-108 MHz
AM: 520-1710 kHz
Battery Backup
YES, 2x AA (not included)
CARE AND MAINTENANCE
SPECIFICATIONS
TROUBLESHOOTING

Other manuals for Electrohome EAAC200

Related product manuals