electrolux installation & environmental information
140
Connecting the appliance to
the power supply
• The electrical outlet should be
readily accessible so that the unit
can be unplugged easily in an
emergency. Or it should be possible
to isolate the oven from the supply
by incorporating a switch in the
fixed wiring in accordance with the
wiring rules.
• The socket should not be
positioned behind the cupboard.
• The best position is above the cupboard,
see (A).
• Connect the appliance to a single
phase 230 V/50 Hz alternating
current via a correctly installed earth
socket. The socket must be fused
with a 10 A fuse.
• The power supply cord may only
be replaced by an electrician.
• Before installing, tie a piece of string
to the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into the
high-sided cupboard, DO NOT crush
the power supply cord.
• Do not immerse the power supply
cord or plug in water or any other
liquid.
Electrical Connections
WARNING: THIS APPLIANCE
MUST BE EARTHED.
The manufacturer declines any
liability should this safety measure
not be observed.
If the plug that is fitted to your
appliance is not suitable for your
socket outlet, you must call your local
Electrolux service agent.
(A)
Environmental information
Ecologically responsible disposal
of packaging materials and old
appliances
Packaging materials
Electrolux microwave ovens require
effective packaging to protect them
during transportation. Only the
minimum packaging necessary is
used. Packaging materials (e.g. foil or
styrofoam) can place children at risk.
Danger of suffocation. Keep
packaging material away from
children.
All packaging materials used are
environment friendly and can be
recycled. The cardboard is made from
recycled paper and the wooden parts
are untreated. Plastic items are
marked as follows:
«PE» polyethylene eg packaging film
«PS» polystyrene eg packaging (CFC-
free)
«PP» polypropylene eg packaging
straps
To Next Page
Loading...
