Electrolux EOB944 - If Something Doesnt Work

IF SOMETHING DOESN’T WORK ?
Please carry out the following checks on your appliance before calling a service Engineer. It may be that the problem
is a simple one, which you can solve yourself without the expense of a service call.
A If the oven shows any sign of a fault, we recommend you do not use it. Disconnect the oven from the mains
or remove the fuse on the appropriate circuit.
PROBLEM
POSSIBLE CAUSES
WHAT TO DO ?
The oven does not work.
• The oven is not wired in or • Switch on at the wall,
switched on at the wall.
• There is a power failure.
Check power supply and fuse.
An automatic cooking program
has been set.
Set the programmer back to the
Off position.
The results of cooking are
unsatisfactory.
Insufficient preheating.
Temperature is too high or too
low.
Consult cooking guides.
Wrong shelf position.
Wrong type of dish.
Temperature is incorrectly set.
Cooking time is incorrect.
Cooking function selector is
wrongly positioned.
The shelf or oven dish are not in
the centre of the oven.
Centre the shelf or oven dish in
the oven.
The oven smokes.
The oven is dirty.
Food has spilled over.
Food (meat) is spitting
excessively.
Clean the oven once cooking is
finished (see section on
cleaning).
Use a larger dish.
Reduce temperature setting.
Steam and condensation settle
on the food and the oven cavity.
The dish has been left inside the
oven too long.
Leave dishes inside the oven no
longer than 15-20 minutes after
the cooking is completed.
The timer keeps flashing 0.00. • There has been a power failure. • Reset the clock.
The timer does not work.
Incorrect setting.
Check the instructions for the
timer.
If the problem still persists after these checks, contact ELECTROLUX Service Force Centre.
In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge
if the fault is not a mechanical or electrical breakdown.
Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
21