Electrolux EOB944 - Fitting the Oven into an In Column or Under

Fitting the oven into an “in column” or
“under counter” cabinet
Please ensure that when the appliance Is installed, it
is easily accessible for the engineer in the event of a
breakdown.
Building-In :
This appliance is classed as a type Y in terms of pro¬
tection against overheating of surround areas.
The surround or cabinet into which the oven will be
built must comply with the following specifications :
• this oven must be fitted in a closed cabinet to
ensure correct air flow for cooling purposes,
• the dimensions must be as shown in the relevant
diagram,
• to avoid overheating a minimum of 5 mm must
separate the oven frame from adjacent partitions
(doors of furniture, etc...),
• adjacent partitions and their coverings must be
capable of resisting a temperature of at least 60°C.
The oven must be correctly installed to ensure electri¬
cal safety. During installation and maintenance, the
oven must be disconnected from the power supply,
and fuses must be removed.
The oven must be installed in a level and stable hou¬
sing cabinet which must be properly assembled and
firmly secured to the wall or floor. The oven is secured
to its surrounding unit by two side stability screws.
They are supplied in a plastic bag inside the oven.
27