Electrolux EOB944 - Page 29

- by connecting the cooker point to the hob and
then connecting the hob to the oven. Provided
that the hob manufacturer permits it, connect
the oven to the hob and the hob to the cooker
point using the same cabling as described
above. Check the hob terminal block is large
enough to take two cables and is of suitable
rating. See Fig. 2.
NOTE: 13 amp cable is not suitable for connecting this
application.
Fig. 2
NOTE : it is good practice to :
- fit an Earth Leakage Circuit breaker to your
house wiring,
- wire your appliance to the latest I EE regula¬
tions.
3371425-01
30