Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem Check if...
The oven does not heat
up.
The fuse is blown.
The door gasket is dam‐
aged.
Do not use the oven.
Contact an Authorised
Service Centre.
Problem Check if...
The display shows
"12.00".
There was a power cut.
Set the time of day.
The water leaks out of
the cavity embossment.
There is too much water
in the cavity emboss‐
ment.
Unsatisfying cooking per‐
formance of the function:
True Fan Cooking
PLUS .
You filled the cavity em‐
bossment with water.
The lamp does not work. The lamp is burnt out.
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. ENERGY EFFICIENCY
14.1 Product Information and Product Information Sheet*
Supplier's name Electrolux
Model identification
EOD5C70BX 944068055
KOD5C70BX 944068165
ENGLISH 21
To Next Page
Loading...
