- 14 -
DGN-TDS-N 11.03 U. H. / A. B. © Electrolux 599 512 232 EN
4.5.2 Manual boost
The boost is activated like on a rotary interface.
- Set the cooking level to “9”
- Release the ‘+’ key and press it again
-- “A” is displayed
- Decrease with ‘-‘ key to the desired cooking level (the cooking level is displayed)
- After approx. 3 sec. the “A” is shown
4.6 Key Lock / Stop&Go button
For HIC compact horizontal, vertical, split the button beneath ON/OFF can be configured with diffe-
rent functions:
1) Key lock function (function lock):
To activate or deactivate key lock function keep warm button must be pressed for one se-
cond.
The status is shown with an LED. If in looked mode wants to press s.o. another key an “L” is
shown for a few sec..
If key lock is active all buttons cannot be pressed except main button, Key Lock.
2) Stop&Go (Keep warm) function:
Each activated cooking zone is set to minimal power level “u”. The status is also shown with
an LED (if equipped).
If Stop&Go is active all buttons cannot be pressed except main button, Stop&Go.
3) For HIC comp. horizontal this key is layouted parallel to the double/triple zone key of the left
rear zone.
For the configuration of the 1 key timer it is necessary to set the HobUI Configuration with this
double / triple zone functionality.
An exception for keys locked in the Stop&Go and Key Lock mode is the end of a timer. In that case
the timer alarm can be quitted directly.
To Next Page
Loading...
Need help?
General
