- 23 -
DGN-TDS-N 11.03 U. H. / A. B. © Electrolux 599 512 232 EN
4.14 Summary of used Symbols in 7 Segment Displays
Symbol Comment
0 9 Cooking levels / time [min] / alarm numbers
. Intermediate cooking levels ( 4. )
- Activation of the cooking zone is not possible (due to active timer),
Induction zone switched off because of over temperature at the coil sensor
(empty pot)
A Fast heating up function ( Ankochstoss )
E Alarm display
F Pot detection no pot detected
H Residual heat indication
or CENTRONICA power level 9
L Lock Function or key lock
or CENTRONICA power level 1
P Power (booster) function for induction
CENTRONICA power level u
∪
Keeping warm
d Demo mode activation
s Service mode activation
c CENTRONICA Priority code selection double/triple zones
o CENTRONICA Residual heat indication-
Not used on HIC interfaces, only on sep. 7-Segment Display in the hob!
To Next Page
Loading...
