Electrolux IC44819FFS - Page 28

0308 7
7
Notice
Date Page
05102004
INSTALLATION
MANUAL
7. Installation
Ironer electricity power supply
CAUTION
Prior to use, the ironer should be plugged into a correctly earthed
power socket complying with the standards in force.
SAFETY
The electrical installation of the machine must be undertaken by
qualied personnel.
CAUTION
Ensure that the electrical voltage is correct and that the power of your
supply is sufcient, before connecting the machine.
The use of power electronics (variator or lter for example) may lead to unexperted release of
breakers with 30 mA differential current device.
To avoid these untimely activations, you ought to use differential protecting systems with
residual current only, having a high level of immunity as regards leakage transient current.
This type of breaker should thus be avoided, or a value of 300 mA maximum should be
observed according to standard NFC 15100.