Electrolux T4530 - Instructions for Use; Drying Programmes and Load Recommendations

9
Programming
Group 0
Adjustable parameters:
0 01 High temperature
0 02 Medium temperature
0 03 Low temperature
0 04 No heat (option)
0 05 Discount (coin only)
0 06 Time per push or coin 1
0 07 Time per coin 2
008 Min.timebeforestart(coinonly)
Group 1
Readable parameters:
1 01 Hour counter - permanent
1 02 Hour counter - resettable
103 Hoursuntilnextservice
1 04 Total coins inserted, coin 1
1 05 Total coins inserted, coin 2
Note!
If a mistake is made or confusion arises while
programming the dryer, press the service button
and start again.
During the programming process, Enter is used to
save new settings.
If you leave programming mode before pressing
Enter to save a new setting, the original value will
be retained.
Group 1 - Reading total counters 1 01 - 1 05
Group 2 - Code to area B
Subgroups
Main groups
Group 0 - Temperature / drying time 0 01 - 0 08
Area A
Area B see service manual
Selecta Control from ver. 4.01
Area B
Quick-diagram