2413 2
8
Notice
Date Page
05201053
INSTALLATION
MANUAL
8. Operating
inspection
• Check the direction of rotation of the motion motor fan (see arrow stuck on the fan).
Switch off the current and shift two phases on the main switch of the machine if the fan rotates
in the wrong direction.
• Check that the cage is empty.
• Open the manual valves controlling the water and steam supplies.
• Operate the machine manually to fi ll with cold water, then hot water. Check that these water
supplies are connected as they should be.
• Start the machine on wash action, and check that the motor is revolving alternately in the both
ways, as normal for wash action.
• Start heating by programming a fi nal temperature. Check that the steam valve opens or the
heating element relay reacts, as appropriate.
• Check that the detergents container is working as they should.
• Check the water and steam connections and the drain valve for signs of any leakages.
• Empty the water from the machine and open its door.
Automatic operation
• Check that the external switch or switches are switched on and that the manual valves for
water and steam are open.
• Run one of the machine's built-in (standard) with heating.
• Check that the program proceeds normally, and the water fi lling, detergent fi lling, heating and
motor action are all working in accordance with the program display on the display screen.
Final checking
If all function checks have been satisfactory, reassemble all protection casings.
To Next Page
Loading...
