2413 3
2
Notice
Date Page
05201053
INSTALLATION
MANUAL
2. Preliminary
instructions
The machine can work without the protective casing when the electric
supply is not cut off.
Interlock the main isolating switch with a padlock.
Close the steam inlet valves.
The use and handling of chemical products such as detergent,
chlorine, acids, antiliming agents etc... may create hazards for health
and environment ; the following precautions should be taken.
- Do not breathe the dusts or steam.
- Avoid contact with skin or eyes (may cause burns).
- In case of important spillage, wear a protecting mask, gloves,
and eye protectors.
- Handle with care.
- Consult the use and fi rst aid advice on the packings.
- Do not dispose pure products in the environment.
Ensure that the machine is not loaded beyond its nominal
capacity (see "Specifi c load" in the instruction booklet’s technical
characteristics).
An excessive load has consequences for the lifetime of the
machine’s organs, as follows :
• Rapid destruction of the suspension elements (springs, shock
absorbers).
• Excessive fatigue of motorisation elements (engine, belt).
• Rapid reduction of lifetime of drum bearings (rolling bearings).
• Opening and destruction of drum doors and tank doors during
oil dehydration.
This is particularly important for your safety and that of others.
The consequence is an immediate cancellation of the warranty.
To Next Page
Loading...
