Electrolux WT830EAG - B5 Setting the Dispensers

10
MANUAL ACTIVATION
Whenever the detergent containers are replaced, it
may be necessary to activate the dispensers manually
in order to fill the hoses and eliminate any air. Simulta-
neously press the buttons, as shown in the figures
below. If necessary, repeat this operation several
times.
B5 SETTING THE DISPENSERS
All operations should be carried out with the appliance
switched on, the hood open and no cycle selected.
SEQUENTIAL START
Press the indicated buttons simultaneously for 5 sec-
onds:
Display of programming mode:
Initial amount of detergent:
Setting the activation time:
Initial amount of rinse-aid:
Setting the activation time:
Amount of detergent during the cycle:
DETERGENT DISPENSER RINSE-AID DISPENSER
LEGEND
Increase
Decrease
Confirm or select next parameter
P3P3
P2P2P1P1
P3P3
P2P2P1P1
P3P3
P2P2P1P1
P3P3P2P2P1P1
P3P3
P2P2P1P1
P3
P3
P2
P2
P1
P1
-
+
P3P3
P2P2P1P1
P3P3P2P2P1P1
-
+
P3
P3
P2
P2
P1
P1