2
1. Read manual
Before using this projector, please read full manual carefully and operate according to this
manual's instructions.
2. Clean
When cleaning this projector, please pull out the power cable. Use a wet cloth to clean,
not using any detergent that may damage the unit.
3. Accessory
Please use our recommended accessory. Or it will damage the projector.
4. Correct environment
Do not place the projector in a wet environment.
5. Installation point
Please place this projector on a stable table.
6. Ventilation
The ventilation in the projector are required for the projector to work stably. Do not let
the dust wall up the filter. Or it will cause the projector to heat up. Please clean the filter
once a month with a some water.
7. Power
Please make sure the power is the same as your projector inquiry specification (220 V
or 110V).
8. Earthing wire
This projector has an earthing wire. It is a three pin plug.
9. Protect the power cable
Please confirm the power cable is in perfect working condition when connecting the
projector.
10. Thunder
When there is thunder, or if you will not be using the projector for a while, please unplug
the power cable from the projector.
11. Repairment
Due to high voltage inside,please do not open or try to repair the projector by yourself.
Please ask a professional technician to repair the projector.
12. Far away heat device
Please make sure the projector is far away from any heat devices. As it will damage the
projector.
Warning:
When using this projector,please read this manual carefully.
If operated incorrectly, it will cause electric shock or fire. So when using or
repairing this projector, please comply with the following points.
To Next Page
Loading...