3
About the Installation
In order to improve the projector’s service life, it should not be in a place
of wet and poorly ventilated condition.
Do not place the projector under direct sunlight.
Projector working temperature: +5℃~ + 35℃.
Projector store temperature: -10℃~ + 60℃.
Do not block the ventilation-window of the projector.
If the projector interior temperature is too hot, the machine will be shut
off automatically. This is due to the heat protection system. So please clean
the filter of projector once a month.It is very important. Do not place the
projector under direct sunlight.
Opening and closing the projector:
When closing the projector,press the power key again. The lamp will turn
off. But the fans will still run for 5 minutes. Do not remove the power cord
immediately after shutting the projector down, allow 5 minutes for it to cool
down. The projector will turn off automatically.
Warning:
Fans will adjust according to temperature , it is controlled by
the system. When the projector is working, the fans turn slowly
or quickly, therefor the sound of the fans will be different. This is
normal.
Do not remove the power plug when the projector is working,
it will cause the fans to stop working, causing the projector to
overheat and this may cause damage to the projector.
To Next Page
Loading...