EasyManua.ls Logo

Elego 37 SENSOR KIT - Lesson 3 DS18 B20 DIGITAL TEMPERATURE SENSOR MODULE; DS18 B20 Module Introduction and Principle

Default Icon
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Http://www.elego.cc
23 / 137
Lesson 3 DS18B20 DIGITAL TEMPERATURE
SENSOR MODULE
Overview
In this experiment, we will learn how to use DS18B20 module test the environmental
temperature and make a thermometer.
Since the previous temperature sensor output is analog. So we need to add additional A/D
and D/A chip into the line transformation. More -over, the Arduino external port is not rich
resources and the utilization rate is not high. These cause a big challenge. So we are create
the Ds18b20 module.
The new DS18B20 Temperature Sensor Module is very good solve the problem. It have the
characteristicoftheeconomy,unique1-wirebusanditcanfullyapplytheArduinoplatform. Users
can easily forma sensor network through using this module.
Component Required:
(1) x Elego Uno R3
(1) x USB cable
(1) x DS18B20 module
(x) x F-M wires