Http://www.elego.cc
18 / 137
Lesson 2 TEMP AND HUMIDITYMODULE
Overview
In this tutorial we will learn how to use a DHT11 Temperature and Humidity Sensor.
It’s accurate enough for most projects that need to keep track of humidity and
temperature readings.
Again we will be using a Library specifically designed for these sensors that will make our
code short and easy to write.
Component Required:
(1) x Elego Uno R3
(1) x USB cable
(1) x DHT11 module
(x) x F-M wires
Component Introduction
Temp and humidity sensor:
To Next Page
Loading...