- 8 -
4.0 Applications
Welding capacity:
Compressed-air pressure 8 bar
Electrode arm 120 mm
Programme switch Material Sheet thickness
Function in mm
Pulse welding with pneu-
matic spot welding tongs sheet steel 3.0 + 3.0
Spot welding with sheet steel 2.0 + 2.0
spot welding tongs pneumatic galvanized steel 1.5 + 1.5
Spot welding with
QUICKSPOT sheet steel 1.0 + 1.0
Push spot welding sheet steel 1.25 + 1.25
Setting for the following functions:
e. g. for sheet thickness 0.8 mm – choose range 1.6 mm
= 2 x 0.8 mm
Straightening out
with washer sheet steel 1.2
Airpuller sheet steel 1.0
Straightening out with
high-speed
planishing hammer sheet steel 0.8
Shrinking sheet steel 0.6 – 1.0
Stud welding Steel bolts Æ 4 – 6 mm
on sheet steel 2.0 mm
To Next Page
Loading...
