Setup menu operation – VGA menu options
25
VGA MENU OPTIONS
Continuously Press [INPUT] on the remote control until coming VGA on the top-right screen.
1. Use
/ to select what you want to adjust in the FEATURE menu.
2. Press ENTER button to select it and then use
/ to adjust.
3. When you are satisfied with your adjustment, press MENU to exit the main menu.
VGA Set
Press
/ button and then press ENTER to enter the VGA set menu as below
z H-Position
Press ENTER button to select it and then use
/ to adjust the horizontal position of the picture.
z V-Position
Press ENTER button to select it and then use / to adjust the vertical position of the picture.
z Phase
Press ENTER button to select it and then use / to adjust the phase of the picture.
z Clock
Press ENTER button to select it and then use / to adjust the clock of the picture.
Note:
Phase- This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Clock- This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal
To Next Page
Loading...
Need help?
General
