Element P220 - Code 39 and Code 11 Parameter Settings; Code 39 and Code 11 Configuration

P220 Stationary Barcode Scanner User Manual 31
System character transfer settings
Transport system characters (Default)
Transport system characters and Not transmit system characters
country codes ("0" for USA)
● UPC-A
Enable/disable recognize UPC-A
Enable (Default) Disable
Setting whether to transmit check-bit
UPC-A barcode data is fixed to 13 characters, and the 13th character is the check bit, which is
used to verify the correctness of all 13 characters.
Enable (Default) Disable