Need help?Do you have a question about the Element P220 and is the answer not in the manual?
General| Brand | Element |
|---|---|
| Model | P220 |
| Category | Barcode Reader |
| Language | English |
This guide provides functional setup instructions for the P220 scanner.
Illustrates front, rear, and left views of the P220 scanner with key dimensions.
Defines pin assignments and functions for both USB and Serial interface cables.
Instructions for powering the scanner on, off, and restarting it when necessary.
Guidelines for cleaning the scanner's recognition window to prevent damage and ensure performance.
Details how to connect the P220 scanner to a host using USB or RS-232 serial cables.
Step-by-step guide for performing manual barcode recognition and finding optimal distance.
Instructions and precautions for restoring the scanner to its original factory default settings.
Details the RS-232 serial interface, default parameters, and host compatibility.
Presents various baud rate options (bps) for configuring the scanner's communication speed.
Describes the scanner's operation as a HID-KBW device, simulating a virtual keyboard.
Lists various international keyboard layouts for USB HID mode configuration.
Explains setting up the scanner for USB virtual serial port communication with host applications.
Details the VID and PID values used to identify the P220 scanner and its interfaces.
Describes manual recognition mode and automatic sensing mode for barcode scanning.
Explains continuous mode where the scanner continuously shoots and recognizes barcodes.
Describes command trigger mode where the host computer initiates barcode decoding.
Details the fill lighting device and options to set the LED light ON/OFF or adjust its level.
Configures successful recognition sound and reverse barcode recognition for 1D and Data Matrix.
Configures common end mark suffixes like LF, CR, LF+CR, and TAB for barcode data.
Settings for EAN-8 and EAN-13 recognition, including extensions and extra-codes.
Configuration for ISSN and ISBN recognition, including bit formats.
Settings for UPC-E recognition, check bit transfer, and UPC-A extension.
Settings for Code 39 recognition, check bits, and Code 11 recognition.
Settings for Interleaved 2 of 5 and MSI barcode recognition, including check settings.
Settings for GS1 DataBar recognition, conversion, and PDF417 recognition.
Settings for Codabar recognition, start/end characters, and QR Code recognition.
Troubleshooting for barcodes not scanned, incorrect data, and unrecognized barcodes.
Troubleshooting for issues with the scanner's sighting light and LED indicators.
Covers global settings including host mode, trigger mode, default parameters, and timeout.
Configures data prefixes and suffixes to be added before or after scanned barcode data.
Settings for LED light control, baud rate of virtual serial port, and check bit methods.
Adjusts settings for scanning multiple barcodes and their sensitivity.
Details commands for starting/stopping scanning, setting transfer mode, and controlling LED prompts.
Enables or disables recognition for common barcode types like UPC, EAN, JAN, and Bookland EAN.
Enables or disables recognition for ISSN EAN barcodes.
To Next Page
