Need help?Do you have a question about the Element P100 and is the answer not in the manual?
General| Brand | Element |
|---|---|
| Model | P100 |
| Category | Barcode Reader |
| Language | English |
Overview of the user manual's purpose and content.
Describes the scanner's physical layout and measurements.
Details scanner interface types and cable connection procedures.
Instructions for powering the scanner and basic maintenance.
Procedures for reading barcodes and restoring factory settings.
Settings for RS-232 serial communication.
Options for setting the baud rate for serial communication.
Configuration for USB HID Keyboard and Virtual COM.
Setting up the scanner as a USB virtual serial port.
Settings for Bluetooth connectivity and related options.
Identifies USB Vendor ID and Product ID for the scanner.
How to operate the scanner using the trigger.
Automatic scanning modes and sensitivity adjustments.
Scanner operation for continuous scanning.
Using commands to program scanner functions.
How the aiming device functions during scanning.
Controls for the scanner's illumination light.
Settings for prompt tones upon successful barcode reading.
Settings for EAN, UPC, Code 39, Code 128, Codabar, MSI.
Settings for Interleaved 2 of 5, Matrix 2 of 5, GS1 barcodes, and 1D Inverse/Anti-color.
Settings for PDF417, Data Matrix, QR Code, Aztec symbologies.
Addresses issues like unreadable barcodes or incorrect data display.
Details command formats, general settings, and host modes.
Configuration for decoding timeout, data prefix, suffix, and case conversion.
Various barcode function configurations like character skipping and conversion.
Table listing parameters to enable or disable various 1D barcode symbologies.
Procedure for setting custom prefix characters for barcodes.
Procedure for setting custom suffix characters for barcodes.
Table mapping ASCII values to characters for scanner output.
To Next Page
