Element P100 - Decoding and Timeout Settings

P100
User Manual
43
Decoding timeout（0.1s~9s）
Operand: 0x44
0.1s
0.2s
......
9.7s
9.8s
9.9s
Data
0x01
0x02
......
0x61
0x62
0x63(Default)
When setting barcode reading, if the barcode is not read, it will stop reading the code time.
Data prefix
Operand: 0x52
Disable
Custom Define
Data0
0x00(Default)
0x01~0xfd
Data1
0x00
0x01~0xfd
Note:
1. If the character set to be 0x20, you need to set the data = 0xFE.
2. If only one character is set, you need to set another to 0x00 Disable.
Data suffix
Operand: 0x45
Disable
Custom Define
Data0
0x00(Default)
0x01~0xfd
Data1
0x00
0x01~0xfd
Note:
1. If the character set to be 0x20, you need to set the data = 0xFE.
2. If only one character is set, you need to set another to 0x00 Disable.
3. The default of Data1 is 0x0a.