Element P100 - Enable;Disable Code 39 Full ASCII; Convert Code 39 to Code32; Code 32 Prefix; Code 93

P100
User Manual
28
Not check (Default) Check
Transmit check character
Transmit check character Disable (Default)
Enable/Disable code 39 Full ASCII
Code 39 data can include all ASCII characters, but the reader can only read part of ASCII
characters by default. Through setting, the function of reading full ASCII characters can be turned on.
Disable (Default) Enable
Convert Code 39 to Code32
Enable Disable (Default)
Code 32 prefix
Enable add prefix character "a" Disable (Default)
Code 93
Enable/Disable code 93
Enable (Default) Disable