Element P100 - Version Number-HYRS_RE; General Settings (Default HID Single Scan Mode); Host Mode; Trigger Mode (Single Scanning, Scanning Continuously, Auto Sensing)

P100
User Manual
42
5 BYTES
1 BYTE
1BYTE~250BYTE
Set barcode Code 128 type Barcode
Prefix Fixed prefix: +N+S-
Operand The operand is the following command data
Data Indicates parameter data carried by this command
Version number——HYRS_RE
General settings (default HID single scan mode)
Host mode (CDC, HID, BT, COM）
Operand: 0x41
USB Virtual Serial Port
USB Virtual Keyboard
BT
General Serial Port
Data
0x02
0x01
0x03
0x04
Set scanner interface mode
Trigger mode (Single scanning, scanning continuously, auto sensing)
Operand: 0x42
Button Trigger
Light continuously
Auto sensing
Data
0x00(Default)
0x01
0x02
Set the scanning mode of the scanner
Default parameters (Restore factory settings)
Operand: 0x43
Data: 0x00
Restore to default parameters of factory settings.