Element P220 - Global Settings (Default HID Once Scan Mode)

P220 Stationary Barcode Scanner User Manual 47
8.1 Global settings (default HID once scan mode)
● Host mode (CDC, HID, BT, COM）
Operand: 0x41
USB Virtual Serial Port
USB Virtual Keyboard
Bluetooth
General Serial Port
Data
0x02
0x01
0x03
0x04
Set scanner interface mode
● Trigger mode (scanning once, scanning continuously, auto sensing)
Operand: 0x42
Button Trigger
Light continuously
Auto sensing
Data
0x00(Default)
0x01
0x02
Set the scanning mode of the scanner
● Default parameters (Restore factory settings)
Operand: 0x43
Data: 0x00
Restore to default parameters of factory settings.
● Decoding Timeout（0.1s~9s）
Operand: 0x44
0.1s
0.2s
......
9.7s
9.8s
9.9s
Data
0x01
0x02
......
0x61
0x62
0x63(Default)
When setting barcode recognizing, if the barcode is not recognized, it will stop recognizing the code
time.