Element P220 - Virtual Serial Port Mode Command Settings

P220 Stationary Barcode Scanner User Manual 54
8.2 Virtual serial port mode command settings
Start scanning
Operand: 0xE4
Data: 0x00
This feature only supports serial mode.
Stop scanning
Operand: 0xE5
Data: 0x00
This feature only supports serial mode.
Setting barcode transfer mode
Operand: 0xEE
Data:
1: Barcode Transfer Mode is pack mode
0: Barcode Output Mode is normal mode
Set LED prompt switch
Operand: 0xEB
Data:
1: ON
0: OFF