P220 Stationary Barcode Scanner User Manual 37
● I 2 of 5 converse EAN-13 setting
Enable conversion Disable conversion (default)
● Matrix 2 of 5
Enable/disable recognize Matrix 2 of 5
Enable Disable (Default)
Setting check and transfer check bit
Interleaved 2 of 5 barcode can not to be contained in Code 11 barcode data. If there is a check
bit that is the last 1 or 2 characters of the data. The check bit is a value calculated based on all
data to check that if the data is correct.
Setting whether to check
No Check (Default) Check
To Next Page
Loading...
