P220 Stationary Barcode Scanner User Manual 36
● Interleaved 2 of 5
Enable/disable recognize Interleaved 2 of 5
Enable (Default) Disable
Setting check and transfer check bit
Interleaved 2 of 5 barcode can not to be contained in Code 11 barcode data. If there is a check
bit that is the last 1 or 2 characters of the data. The check bit is a value calculated based on all
data to check that if the data is correct.
Setting whether to check
No Check (Default)
USS Check OPCC Check
Set whether to transfer the check bit
Transmit No Transmit (Default)
To Next Page
Loading...
