Element P220 - Page 56

P220 Stationary Barcode Scanner User Manual 51
● Buzzer enable setting
Operand：0x4D
● The transmit rate in HID mode setting
Operand：0x4E
● Same barcode timeout setting in non-scanning mode
Operand：0x4F
Data：
0x00 indicates that there is no Timeout Invalid. If there is a barcode, it can still output.
0x01 indicates the timeout of 100ms.
0x63 indicates the timeout 9.9s.
● Mobile performance setting
Operand：0x51
Note: Ultra-fast mode in auto-sensing mode, the sensing distance of the scanning paper barcode will
be reduced significantly.
● Center sighting decode setting
Operand：0x53
Enable
Disable
Data
0x01 (Default)
0x00
Fast
Normal
Slow
Data
0x01
0x02 (Default)
0x0a
Variable
Data
0x00~0x63
Normal
Fast
Ultra-Fast
Data
0x00(Default)
0x01
0x02
Enable
Disable