- 7 -
Plasma TV Service Manual
Element Confidential
(9) If the power cable is damaged, or if the connector is loose, do not use the product:
otherwise, this can lead to fire or electric shock.
(10) If the power connector or the connector of the power cable becomes dirty or dusty,
wipe it with a dry cloth. Otherwise, this can lead to fire.
(11) PDP Module uses a high voltage (Max.450V dc). Keep the cautions concerning
electric shock and do not touch the Device circuitry when handling the PDP Unit. And
because the capacitor of the Device circuitry may remain charged at the moment of
Power OFF, standing by for 1 minute is required in order to touch the Device circuitry.
(12)Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
1.2 Notes
Notes on Safe Handling of the Plasma Display and during service
The work procedures shown with the Note indication are important for ensuring the
safety of the product and the servicing work. Be sure to follow these instructions.
• Before starting the work, secure a sufficient working space.
• At all times other than when adjusting and checking the product, be sure to turn OFF
the POWER Button and disconnect the power cable from the power source of the TV
during servicing.
To Next Page
Loading...
Need help?
General
